my "device" indicates that it is "disconnected" how can I change it to "OK" ?
How does one change "Status"
Posted 28 January 2014 - 08:54 AM
When you define your device, you have two fields named "Data Stream Frequency" and "Status Stream Frequency". This fields are a number representing the time range in which a data stream should be received (expressed in minutes).
If your device doesn't recive a stream in that timespan, their status will be automatically "disconnected", but If you send a stream your device will change to "OK".
To know more about the different inner device status, please visit:
Posted 02 March 2015 - 08:54 PM
I had the same problem so I reduced the Frequency numbers to 1. I expected that if I sent more than 1 mqtt message per minute, the status would change to OK, but it didn't.
When I switch on my device, I send a "status" message and then it begins to send a "stream" message every 5 seconds, which should be the frequency numbers?
Thanks in advance!
Posted 03 March 2015 - 07:27 PM
I misunderstood the term "Frequency". I thought in times per second instead of at least one in that range of time.
By the way, very good platform !!
Posted 21 December 2017 - 11:16 AM
hi actually im using Mbed Mqtt library i have problem while publishing the data . i dont know how to use this library along with my project
how do that below
Posted 26 December 2017 - 12:17 PM
If you want to send a data streams to Carriots, all the information that you need is:
Username: your apikey
You can publish xml or json to these topics.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users